Cells and Batteries Testing
Comprehensive Testing Solutions for Lithium, EV, Automotive & Industrial Batteries
BIS-Recognized & NABL-Accredited Testing Lab in Faridabad, India
Cells & Batteries Testing Solutions
As a BIS-recognized, NABL-accredited and IQAS-approved testing laboratory based in Faridabad, India, we provide end-to-end testing solutions for all battery types — from lithium-ion cells and industrial batteries to EV battery packs, automotive batteries, and car batteries. Our services ensure compliance with national and international standards for safety, performance, and environmental requirements.
BIS, NABL and IQAS Compliance
Mandatory testing as per IS 16046, IS 16270, AIS 038, AIS 048, AIS 156, and other relevant standards for EV, automotive, and industrial batteries.
Performance Validation
Capacity testing, cycle life evaluation, efficiency verification, and C-rate performance for all battery chemistries including Li-ion, NiMH, and lead-acid.
Global Standards
IEC, EN, UL, UN 38.3, AIS, and other international standard support for export-ready certification of cells and battery packs.
Battery Products We Test
Comprehensive testing solutions for all types of batteries and energy storage devices
Lithium Batteries
- •Li-ion cells & packs
- •Lithium polymer batteries
- •LiFePO4 batteries
- •Portable power banks
Industrial Batteries
- •Lead-acid batteries
- •VRLA batteries
- •Ni-Cd & Ni-MH batteries
- •Solar storage batteries
Specialty Batteries
- •Button cells & coin cells
- •EV batteries & modules
- •Medical device batteries
- •Aviation batteries
EV Battery Testing & Electric Vehicle Testing
As India's EV sector grows rapidly, compliance with AIS standards for EV battery testing has become mandatory for all electric vehicle manufacturers and battery suppliers.
Our lab is one of the few NABL-accredited facilities in India offering complete EV testing and EV battery testing services as per AIS 038 Rev 2:2020, AIS 048:2020, and AIS 156:2022. Whether you manufacture two-wheelers, three-wheelers, or four-wheel electric vehicles, our team ensures your traction battery packs meet all safety and performance benchmarks before market launch.
EV Battery Tests We Perform
- Vibration and mechanical shock testing (AIS 038 / AIS 048)
- Thermal management and thermal runaway evaluation
- Overcharge, over-discharge & short circuit protection
- Insulation resistance and dielectric strength
- State of Charge (SoC) and State of Health (SoH) assessment
- IP (Ingress Protection) testing for battery enclosures
- Cycle life and capacity retention testing
- Cell balancing and Battery Management System (BMS) validation
Applicable Standards for EV Testing
Automotive Battery Testing & Car Battery Testing
From 12V starter batteries to advanced hybrid and electric vehicle packs, our automotive battery testing covers the full spectrum of car and vehicle battery requirements.
Car Battery Testing
Comprehensive car battery testing for conventional 12V lead-acid and AGM batteries, covering cold cranking amps (CCA), reserve capacity, charge acceptance, and durability under various climatic conditions as per relevant BIS and international standards.
- Cold Cranking Amps (CCA) Test
- Reserve Capacity Testing
- Charge Acceptance Test
- Endurance & Cycle Life
Automotive Battery Testing
Automotive battery testing for hybrid vehicles (HEV/PHEV) and conventional ICE vehicle batteries. We evaluate performance under high-current discharge, vibration, temperature extremes, and electrical abuse scenarios that mirror real road conditions.
- High-Rate Discharge Testing
- Vibration & Shock Tests
- Thermal Cycling & Abuse
- Safety & Compliance
Industrial Battery Testing
Industrial battery testing for stationary, traction, and backup power applications. We test lead-acid cells (IS 1651 & IS 1652), industrial lithium systems (IEC 62619), and solar storage batteries (IS 16270) for use in telecom, UPS, renewable energy, and forklift applications.
- Stationary Lead-Acid Battery Tests
- Industrial Li-ion Safety Tests
- Solar PV Battery Testing
- UPS & Backup Battery Testing
Our Testing Services
Safety & Compliance
Electrical Safety
Short circuit, overcharge, forced discharge testing as per IEC 62133, UL 1642, and AIS standards for automotive and EV batteries
Environmental Safety
Thermal abuse, altitude simulation, vibration for industrial batteries and EV packs (UN 38.3, AIS 038)
Transport Safety
Packaging validation, drop testing, and crush tests for safe transportation of lithium and industrial batteries
Performance & Reliability
Capacity & Efficiency
Charge retention, cycle life, C-rate performance for lithium cells, automotive batteries, car batteries, and industrial battery systems
Environmental Durability
Temperature cycling, humidity exposure, and shock tests simulating real-world automotive and industrial operating conditions
Aging Characteristics
Shelf life studies, calendar aging, and degradation analysis for EV battery packs and stationary storage systems
Advanced Testing Capabilities
Specialized Equipment
- ✓Battery cyclers and analyzers (up to 1000V) for EV and automotive batteries
- ✓Environmental test chambers (-70°C to +180°C)
- ✓Abuse testing equipment (crush, nail penetration) for industrial batteries
- ✓Battery emulation systems
- ✓Precision measurement instruments
- ✓Altitude simulation chamber for UN 38.3 testing
- ✓High-current discharge equipment for car battery CCA testing
Accreditation Highlights
BIS CRS
Mandatory testing for batteries under Compulsory Registration Scheme — covering lithium, industrial, and automotive batteries
IECEE CB Scheme
Global market access to 50+ countries for certified battery products
AIS Approved Lab
Authorized for EV battery testing as per AIS 038, AIS 048 & AIS 156 for two-, three-, and four-wheel EVs
International Standards
Testing to IEC, EN, UL, UN 38.3, and other international standards for export compliance
Why Choose ITC Lab for Battery Testing in Faridabad?
From IS to IEC, UL, UN 38.3, and AIS — all under one roof
Nationally accredited for reliable and internationally recognized test reports
Authorized for mandatory BIS CRS testing of cells and batteries
Covering EV battery testing, automotive battery & car battery testing
Products We Test
| S. No. | Product Name | IS Number |
|---|---|---|
| 1 | Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes - Safety Requirements for Portable Sealed Secondary Cells and Batteries Made from them for use in Portable Applications Part 1 Nickel System | IS 16046-1: 2018/ IEC 62133-1:2017 |
| 2 | Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes - Safety Requirements for Portable Sealed Secondary Cells and Batteries Made from them for use in Portable Applications Part 2 Lithium System | IS 16046-2: 2018/ IEC 62133-2:2017 |
| 3 | Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes-Secondary Lithium Cells and Batteries for Portable Applications | IS 16047-3:2018/ IEC 61960-3: 2017 |
| 4 | Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes - Safety Requirements for Secondary Lithium Cells and Batteries, for use in Industrial Appliance | IS 16805:2018 |
| 5 | Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes - Safety Requirements for Secondary Lithium Cells and Batteries, for use in Industrial Appliance | IEC 62619:2022 |
| 6 | Secondary cells and batteries containing alkaline or other non-acid electrolytes — Safety requirements for secondary lithium cells and batteries, for use in Electrical Energy Storage System | IEC 63056:2020 |
| 7 | Measurement of Cycle Life and Energy Density for Advanced Chemistry Cells —Method of Tests | IS 17882:2022 |
| 8 | Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes - Secondary Lithium Cells and Batteries for Use in Industrial Appliance | IS 16822:2019/IEC 62620 :2014 |
| 9 | Electrical Propelled Road Vehicles-Dimensions of Secondary Lithium-ion cells | IS 16827:2018 |
| 10 | Standard for Safety - Lithium Batteries | UL 1642:2020 |
| 11 | Lithium metal and lithium-ion cells & Batteries | UN 38.3 (7th Revision) |
| 12 | Lithium metal, lithium ion and sodium ion cells & Batteries | UN 38.3 (8th Revision) |
| 13 | Specific Requirements for Electric Power Train of Vehicles | AIS 038 Rev 2:2020 |
| 14 | Battery Operated Vehicles -Safety Requirements of Traction Batteries | AIS 048:2020 |
| 15 | Specific Requirements for L Category Electric Power Train Vehicles | AIS 156:2022 |
| 16 | Stationary Cells and Batteries, Lead-Acid Type with Tubular Positive Plates | IS 1651:2013 |
| 17 | Stationary Cells and Batteries, Lead-Acid Type with Plante Positive Plates | IS 1652:2013 |
| 18 | Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test | IS 16270:2023 |
Ready to Test Your Batteries?
Contact our battery experts for comprehensive testing of your energy storage products — from EV batteries and automotive batteries to industrial and car batteries.
Located in Faridabad, Haryana — serving clients across India and globally with BIS, NABL, and IQAS accreditation.